Protogate Freeway 3600 Installationsanleitung PDF herunterladen (Seite 24)

Chapter 5. Conﬁguring the Boot Parameters Using the Local Console Freeway 3412 Hardware Installation Guide

2) Display Boot Parameters

3) Edit Boot Parameters

Select:

5. Select option 3 to edit the boot parameters. The system displays the parameters one at a time. Three actions are

possible as each parameter is displayed:

• To preserve a parameter, press <return>

• To edit a parameter, type the new alpha-numeric information and press <return>

• To clear a parameter, press the period key (‘.’) followed by <return>

Figure 5-2 shows an example of a Freeway System Boot Parameters screen.

Figure 5-2. Example of the Freeway System Boot Parameters (Local Console)

Freeway System Boot Parameters

---------------------------

Boot Device : fei

Processor Number : 0

FTP User Name : freeway

FTP Password : password

Flags : 0

Freeway Server Name : freeway1

Freeway Inet Address : 207.67.135.224

Freeway Subnet Mask : ffffff00

Boot Server Name : bootmaster

Boot Server Inet Address : 207.67.135.198

System Boot Directory : /usr/local/freeway/boot

System Boot File Name : fw486

Configuration File Name : bootcfg.pci

Secondary Net Interface :

Gateway Inet Address :

6. Conﬁgure the boot parameters as described in

Table 4-1.

7. After you have entered the last parameter (Gateway Inet Interface), the screen displays:

Save modifications?

Enter ’yes <return>’ to save modifications.

Enter ’no <return>’ to prevent modifications.

If all of the parameters have been entered correctly, enter yes; otherwise, enter no.

If you enter yes, the screen displays the following message, and the system returns to the Freeway Boot System

Main Menu after data storage completes:

24 Protogate DC-900-2018A

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31

Keine Kommentare

Protogate Freeway 3600 Installationsanleitung Seite 24